ADR USB 3.1 Producer with 15 targets
The ADR USB 3.1 USB Stick duplicator comes with the newest technology in the transfer speed. The productline offers models from 7 to 47 target units. The transfer speed is up to 16 GB/min. There is no need of a PC or other software and no risk of virus infection.
As the copy is done with bit-by-bit copy there is no danger of wrong copy results at any time. With the copy & compare function, you can even be 100% safe your new targets are exactly the same as your source.
Our duplicators are standalone devices. Just plug in the power cord of the system and start the production.
The unit is operated with the internal Controller with 4 buttons and an LCD display which is very easy to use.
For all our units ADR AG offers free firmware updates so we make sure there is a high compatibility to new chips and controllers in the market.
Impeccable Efficiency
Impeccable EfficiencyADR USB3.1 Tower duplicator is capable of copying at 16GB/min (260MB/sec) (Non PC-based). It is specially designed for USB3.1 devices, and the real high-speed transmission enables high volume USB-Hard Drives duplication in amazing efficiency.
Copy Modes
1. Quick copy (Data & system): Supports Windows (NTFS), FAT16/62/64, and Linux (ext2/3/4)
2. Whole media: Bit-by-bit copy mode which copies exactly like the master device. Supports al proprietary and unknown formats.
Diagnostic Modes:
H2 / H5 Test: Checks the flash’s quality by reading and writing.
Capacity, Bad Sector, Read / Write Speed Filter.
USB3.1 / USB2.0 Signal Detection.
3 Sanitization Modes:
Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete.
Full Erase: Erases the entire Hard Disk Drive.
DoD Erase: Complies with U.S. Department of Defense erasure standards.
| Model | ADR1-15USB31 | |
| Target | 1-15 | |
| Specifications | Maximum Transfer Speed | 16GB/min. (260MB/sec.) *Actual performance is dependent on USB transfer speeds & number of sticks/HDDs* |
| Capacity | Supports the latest market available capacity Designed support capability over 18TB+. |
|
| Operation Type | Stand-alone, FPGA-based operation (Non PC-based) | |
| Supported Languages | English or Japanese | |
| LCD Display | Backlit Monochrome LCD Display | |
| LEDs | 2 LED (Red/Green) Indicators per port | |
| Control Panel | 4 Push Buttons(▲, ▼, OK, ESC) | |
| Features | Copy Modes | Quick Copy (Systems & Files Copy) |
| Whole Media Copy | ||
| Compare Function | Bit-by-bit data comparison | |
| Diagnostic Modes | H2 Test: Overwrites and Reads (by H2 files) | |
| H5 Test: Overwrites and Reads (by default files of the system) | ||
| Sanitization Modes | Quick Erase, Full Erase, and DoD Erase | |
| Format Functions | Formats device to FAT16 or FAT32 | |
| Compatibilities | Compatible Devices | USB-HDD / USB 3.1 / USB 2.0 / USB 1.1 USB Sticks. |
| Compatible Devices (with required adapter) | SD/MicroSD/CF | |
| Supported Formats | Quick Copy: FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4) | |
| Whole Media Copy: All Formats, including proprietary formats | ||
| Supported O/S | All (Windows, Mac, Linux, and other stand-alone systems) | |
| Hardware Specifications | Power Supply | 80W~or up (depends on different type of system requirement) |
| Working Temperature | 5°C ~ 45°C (41°F ~ 113°F) | |
| Storage Temperature | -20°C ~85°C (-4°F ~ 185°F) | |
| Working Humidity | 20% ~ 80% | |
| Storage Humidity | 5% ~ 95% | |
| Certifications | FCC, CE, RoHS | |
