ADR USB 3.1 Producer with 15 targets

ADR Ingenieurprodukte

  • $4,044.82
    Unit price per 
Tax included.

The ADR USB 3.1 USB Stick duplicator comes with the newest technology in the transfer speed. The productline offers models from 7 to 47 target units. The transfer speed is up to 16 GB/min. There is no need of a PC or other software and no risk of virus infection.

As the copy is done with bit-by-bit copy there is no danger of wrong copy results at any time. With the copy & compare function, you can even be 100% safe your new targets are exactly the same as your source.

Our duplicators are standalone devices. Just plug in the power cord of the system and start the production.
The unit is operated with the internal Controller with 4 buttons and an LCD display which is very easy to use.

For all our units ADR AG offers free firmware updates so we make sure there is a high compatibility to new chips and controllers in the market.

000 vineta Impeccable Efficiency

ADR USB3.1 Tower duplicator is capable of copying at 16GB/min (260MB/sec) (Non PC-based). It is specially designed for USB3.1 devices, and the real high-speed transmission enables high volume USB-Hard Drives duplication in amazing efficiency.


tw Nzg5

000 vineta Copy Modes

1. Quick copy (Data & system): Supports Windows (NTFS), FAT16/62/64, and Linux (ext2/3/4)
2. Whole media: Bit-by-bit copy mode which copies exactly like the master device. Supports al proprietary and unknown formats.


000 vinetaDiagnostic Modes:

001 vinetaH2 / H5 Test: Checks the flash’s quality by reading and writing.

001 vinetaCapacity, Bad Sector, Read / Write Speed Filter.

001 vinetaUSB3.1 / USB2.0 Signal Detection.

000 vineta 3 Sanitization Modes:

001 vinetaQuick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete.

001 vinetaFull Erase: Erases the entire Hard Disk Drive.

001 vinetaDoD Erase: Complies with U.S. Department of Defense erasure standards.

Model ADR1-15USB31
Target 1-15
Specifications Maximum Transfer Speed 16GB/min. (260MB/sec.) *Actual performance is dependent on USB transfer speeds & number of sticks/HDDs*
Capacity Supports the latest market available capacity
Designed support capability over 18TB+.
Operation Type Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages English or Japanese
LCD Display Backlit Monochrome LCD Display
LEDs 2 LED (Red/Green) Indicators per port
Control Panel 4 Push Buttons(▲, ▼, OK, ESC)
Features Copy Modes Quick Copy (Systems & Files Copy)
Whole Media Copy
Compare Function Bit-by-bit data comparison
Diagnostic Modes H2 Test: Overwrites and Reads (by H2 files)
H5 Test: Overwrites and Reads (by default files of the system)
Sanitization Modes Quick Erase, Full Erase, and DoD Erase
Format Functions Formats device to FAT16 or FAT32
Compatibilities Compatible Devices USB-HDD / USB 3.1 / USB 2.0 / USB 1.1 USB Sticks.
Compatible Devices (with required adapter) SD/MicroSD/CF
Supported Formats Quick Copy: FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4)
Whole Media Copy: All Formats, including proprietary formats
Supported O/S All (Windows, Mac, Linux, and other stand-alone systems)
Hardware Specifications Power Supply 80W~or up (depends on different type of system requirement)
Working Temperature 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature -20°C ~85°C (-4°F ~ 185°F)
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Certifications FCC, CE, RoHS

We Also Recommend